CALL TOLL FREE: 800-515-4815 | 574-259-2444

Portable Jib

Capacity

250 -
1,000

Span

4 - 16 feet

Rotation

360°

Pictures and Videos

Portable Jib Crane

Features
Warranty
What are the benefits of a Portable Jib Crane? A Poured foundation can cost as much or more than the jib crane itself. The benefit of using a portable jib means YOU save money! Poured foundations can take up to a week to cure before you can install the jib. Now it's even easier to relocate your jib crane when there's no poured foundation. The portable base design is easily transported by a fork truck. This means more flexibility when choosing where to place your jib cranes. You can place them closer to machines and other obstructions because there is no need for a large foundation to pour. These jibs are designed to service circular areas and support tool balancers, vacuum lifters, and hoists. They can accommodate up to a 360° rotation. Capacities are available from 100 lbs. to 1000 lbs. and spans up to 16 ft. A portable Jib Crane increases productivity through easy boom rotation and trolley movement, thus providing a rapid return on investment.

Applications

  • Circular areas not adequately covered by a main crane.
  • Supporting tool balancers, hoists, vacuum lifters and welding wire feeders.


Accessories

Festoon Clamps: Festoon clamps anchor the festooning at the start of the jib boom and also prevent the festoon gliders from exiting the track. Festoon clamps for vacuum hose are too.
Festoon Gliders: Festoon gliders are used to support flat electrical cable. No tools are required to attach the festooning. One festoon clamp is required with the use of festoon gliders.
Festoon Trolleys: festoon trolleys are used to support flat cable, air hose, or round cable along the boom. The trolleys have four wheels and a pivoting festoon saddle. Festoon trolleys for vacuum hose are available too. One festoon clamp is required with the festoon trolleys.
Flat Cable or Air Hose: A flat cable festooning system is required when using an electric powered hoist. Air hose is also available.
Four Ring Electrical Collector (Top or Bottom Entry): A collector is needed to provide a continuous 360° boom rotation when using an electric powered lifting device. A bottom entry collector needs 4 additional inches of clearance above the pivot pin. A top entry collector needs 11-1/4 additional inches of clearance above the pivot pin.
Air Swivel (Top or Bottom Entry): An air swivel is needed to provide a continuous 360° boom rotation when using an air lifting device. A bottom entry air swivel needs an additional 5 inches of clearance above the pivot pin. A top entry air swivel needs between 8-1/2 and 9-1/2 inches (depending on span and capacity) of additional clearance above the pivot pin.
Manual Rotation Stops: Rotation stops are required to limit the floor mounted jib rotation to less than 360° to prevent boom damage to machines, equipment, or building structures.
Vacuum Platform Attachment: If a vacuum lifted motor/blower is required to be mounted on the mast or building column, then a specially-designed vacuum blower support platform attachment can be designed for this specific application.

Coming Soon

Coming Soon

Gorbel's 5 Year Warranty

Products included in 5 year Warranty:

Manual Jibs (Work Station Jibs, Articulating Jibs and I-beam Jibs)

What is Covered for 5 Years:

Defects in material and workmanship

Wearable parts/trolley and end truck wheels only)

Details:

It is agreed that the equipment purchased hereunder is subject to the following limited warranty and no other. Gorbel Incorporated ("Gorbel"), warrants the manual push-pull Work Station Cranes and Jib Crane Products to be free from defects in material or workmanship for a period of 5 years or 10,000 hours use from date of shipment. Included in this warranty is coverage of work station crane trolley and end truck wheels. This warranty shall not cover failure or defective operation caused by operation in excess of recommended capacities, misuses, negligence or accident, and alteration or repair not authorized by Gorbel, Inc. No system shall be modified after manufacture without the written authorization of Gorbel, Inc. Any field modification made to the system without the written authorization of Gorbel, Inc. shall void Gorbel's warranty obligation. Other than as set forth herein, no other express warranties of merchantability or fitness for a particular purpose, are made by Gorbel with respect to its products and all such warranties are hereby specifically disclaimed. Gorbel shall not be liable under any circumstances for any incidental, special and/or consequential damages whatsoever, whether or not foreseeable, including but not limited to damages for lost profits and all such incidental, special and/or consequential damages are hereby also specifically disclaimed. Gorbel's obligation and Purchaser's or end user's sole remedy under this warranty is limited to the replacement or repair Gorbel's products at the factory, or at the discretion of Gorbel, at a location designated by Gorbel. Purchaser or end user shall be solely responsible for all freight and transportation costs incurred in connection with any warranty work provided by Gorbel hereunder. Gorbel will not be liable for any loss, injury or damage ot persons or property, nor the damages of any kind resulting from failure or defective operation of any materials, or equipment furnished hereunder. Components and accessories not manufactured by Gorbel are not included in this warranty. Purchaser's or end user's remedy for components and accessories not manufactured by Gorbel is limited to and determined by the terms and conditions of the warranty provided by the respective manufacturers of such components and accessories.

Product Brochure
Owners Manual
Sample Bid Specs